Port leds, Status leds – Intel 460T User Manual
Page 10
4
C
H
A
P
T
E
R
1
Intel Express 460T Standalone Switch Users Guide
Port LEDs
The LEDs above each port indicate port status, individual port speed, and
port activity.
5
6
7
8
LED
Status
Meaning
Left
Solid green
1
Device linked.
Blinking green
Receiving activity on that port.
Blinking orange
A collision was detected on this segment.
Off
No link detected.
Right
Solid orange
Device connected at 10 Mbps.
Off
Device connected at 100 Mbps.
Status LEDs
The switch status LED is located above the port LEDs. This LED indicates
the condition of the switch.
Status
LED
Status
Meaning
Status
Orange
Switch is performing diagnostics.
Green
Diagnostics have passed, the switch is ready.
Red
2
Diagnostics have failed.
_________________________________________________
1
If the left LED is solid green, but there is no activity when you try to ping a device
connected to that port, the port is probably disabled through management. Re-enable the
port and try again.
2
When the switch is first powered on, the Status LED is red for a couple of seconds before
the diagnostic mode starts, then it turns orange.
Left LED
Port Activity
(Green/Orange)
Right LED
Port Speed
(Orange)