Vlan and gvrp status – Intel 460T User Manual
Page 121
115
Using Local Management
C
H
A
P
T
E
R
5
Local Management
VLAN and GVRP Status
Description
This screen is available only if the switch is running tag-based (IEEE
802.1Q) VLANs. The screen shows information about one VLAN at a
time. Press N or P to view status information for other tag-based VLANs
on the switch.
GARP Status: Shows whether the VLAN can process GVRP requests.
Number of IEEE 802.1Q VLANs: Total number of tag-based VLANs
(both static and dynamically created) currently configured on the switch.
IEEE 802.1Q VLAN ID: VLAN ID of the selected tag-based VLAN.
Current Egress Ports: All ports that belong to the specified tag-based
VLAN.
Current Untagged Ports: All ports that are configured to strip 802.1Q
VLAN information from packets leaving the switch.
Status: Whether the VLAN is permanent or dynamic. A permanent (static)
tag-based VLAN is created and configured by the switch administrator. A
dynamic VLAN is created by the switch in response to GVRP requests from
GVRP-enabled network nodes.
Creation time since switch power up: Amount of time the VLAN has been
active since the last time the switch was rebooted.
LOCATION
Main Menu
Monitoring
VLAN/GVRP Status