Configure vlan id for untagged traffic – Intel 460T User Manual
Page 109
103
Using Local Management
C
H
A
P
T
E
R
5
Local Management
Configure VLAN ID for Untagged Traffic
Description
Use this screen to set up the switch to manage incoming packets that do
not contain IEEE 802.1Q VLAN tags or priority-tagged traffic (packets with
a VID of zero). This applies to ingress traffic only; it does not apply to
outbound traffic.
Untagged traffic is ordinarily assigned to VLAN 1 (the DEFAULT_VLAN),
which includes all ports on the switch. However, if you don’t want to send
untagged traffic on a port to the default VLAN, you can assign a different
PVID.
For example, if you set a port’s PVID to 5, all untagged traffic on the port is
assigned to VID 5—even if the port does not belong to that VLAN.
PVID: Type the VID of the existing 802.1Q VLAN where you want to send
untagged traffic.
APPLY: Applies the changes on this page.
LOCATION
Main Menu
Configure VLAN
Configure Port VLAN ID...