Intel 460T - Manual (Page 110)

104
C H A P T E R 5 Intel Express 460T Standalone Switch Users Guide
GVRP and Ingress Filter Settings
Description
Configure Ports: Use the z to toggle the range of ports that you can
configure.
GVRP: Enables the switch to create VLANs dynamically. Use the z
to toggle the action for each port.
<Enabled>: The switch monitors traffic on this port for GVRP requests
from network nodes. If a GVRP-enabled device sends a request to this
port, the switch creates a VLAN dynamically and adds the requesting
device to the new VLAN. This is the default setting.
<Disabled>: The switch ignores GVRP requests in incoming packets on
this port.
Ingress Filtering: Enables the switch to filter incoming packets based on
VLAN membership. Use the
z to toggle the action for each port.
<Enabled>: Incoming packets belonging to a specific VLAN are
forwarded only if the port belongs to that VLAN. This is the default
setting.
<Disabled>: All packets coming into the port are forwarded, regardless
of the port’s VLAN membership.
LOCATION
Main Menu
Configure VLAN
GVRP/Ingress Filter Settings
NOTE
In order for GVRP to work, the
port must be connected to a
switch that supports GVRP.