Removing the cover, Types 8185, 8186, 8192, 8413, and 8430, Removing – IBM THINKCENTER 8189 User Manual

Page 36: Cover, Types

Advertising
background image

1 Power

connector

8 USB

connectors

2 Mouse

connector

9 Ethernet

connector

3 Keyboard

connector

10 Microphone

connector

4 Serial

connector

11 Audio

line

out

connector

5 Parallel

connector

12 Audio

line

in

connector

6 VGA

monitor

connector

13 AGP

adapter

connector

7 USB

connectors

14 PCI

adapter

connectors

Note:

Some

connectors

on

the

rear

of

the

computer

are

color-coded

to

help

you

to

determine

where

to

connect

the

cables

on

the

computer.

Removing

the

cover

Important:

Read“Safety

information”

on

page

247

and“Handling

electrostatic

discharge-sensitive

devices”

on

page

250

before

removing

the

cover.

Types

8185,

8186,

8192,

8413,

and

8430

1.

Shut

down

your

operating

system,

remove

any

media

(diskettes,

CDs,

or

tapes)

from

the

drives,

and

turn

off

all

attached

devices

and

the

computer.

2.

Unplug

all

power

cords

from

electrical

outlets.

3.

Disconnect

all

cables

attached

to

the

computer.

This

includes

power

cords,

input/output

(I/O)

cables,

and

any

other

cables

that

are

connected

to

the

computer.

4.

Press

the

buttons

on

the

sides

of

the

computer

and

pivot

the

rear

end

of

the

cover

up

toward

the

front

of

the

computer.

30

Hardware

Maintenance

Manual

Advertising