Interphase Tech iSPAN 5535 PRI - Manual (Page 24)

Minimum System Requirements
4 Interphase Corporation
• Dual PRI version:
– 32-bit RISC processor PowerPC 403GCX @
66 MHz
– 8-MB dual port DRAM memory and 128-KB Flash
EEPROM
– RAS support for up to 60 B channels and 2 D
channels (Europe) or 46 B channels and 2 D
channels (United States and Japan)
• 32-bit, 33-MHz local bus
• HDLC and transparent mode on each B channel
• Short PCI form factor (174.63 x 106.68 mm)
• Full plug-and-play installation.
Minimum System Requirements
The minimum system requirements for using this adapter with
Microsoft Remote Access Service (RAS) are:
• An Intel
®
system running Windows NT Version 4.0
(either Workstation or Server)
• Bus architecture: PCI Local Bus Specification Revision
2.1
• Processor: Pentium at 133 MHz
• 32 MB RAM (you may need up to 128 MB depending
on your RAS configuration and usage)
• A hard disk with 3 MB free
• A 3.5" diskette drive or a CD-ROM drive
• Single PRI version: One functional ISDN primary rate
interface
• Dual PRI version: One or two functional ISDN primary
rate interfaces