Interphase Tech iSPAN 5535 PRI - Manual (Page 48)

Installing and Setting Up the Drivers
28 Interphase Corporation
Installing and Setting Up the Drivers
To install and set up the adapter drivers, do the following:
1. Install the WAN and RAS Support drivers.
2. Set up RAS support properties.
3. Set up ISDN B channels.
4. Check the ISDN line with the LoopTest utility.
N
OTE
The
iSPAN
-PRI adapter is called either 5535-1P-PRI or
5535-2P-PRI in the software installation and configuration
Installing the Drivers
Before you start, make sure the adapter is installed in your
machine, and that you are logged on with administrator rights
to the Windows NT 4.0 system.
To install the WAN and RAS support drivers for the adapter:
1. From the Start menu, select Settings, and then Control
Panel. Then double-click the Network icon to display
the Network Identification dialog: