Interphase Tech iSPAN 5535 PRI - Manual (Page 66)

Removing the Drivers
46 Interphase Corporation
c. If Windows NT does not display the server name
automatically, enter the server name preceded by
two backslashes (\\). To determine the server name,
see Index of Common Tasks on page 115.
d. Click OK.
To use the adapter in the RAS environment (RAS Server or
RAS Dial-Up Networking), see the following:
• For an overview, see Index of Common Tasks on
page 115.
• For detailed information, see Microsoft RAS online
help.
Removing the Drivers
If you no longer use the adapter, do the following to remove the
WAN and RAS Support drivers:
1. Be sure you are logged on with administrator rights to
the Windows NT 4.0 system.
2. From the Start menu, select Settings, and then Control
Panel. Then double-click the Network icon, and select
the Adapters tab to display the Adapters dialog: