Icom COMMUNICATIONS RECEIVER IC-R3 - Manual (Page 38)

34
11
TV OPERATION
■ TV operation
The receiver can receive TV (NTSC or PAL depending on ver-
sion). TV channels are preset depending on versions.
The received video and audio can be output from [A/V OUT] if
desired.
◊
TV channel receiving
q Push [FUNC] + [ ↕ ] for 2 sec. to turn the color LCD ON, if
desired.
• Only the audio part of the TV contents can be received.
w Push [ ↔ ] one or more times to select the TV channel
band.
• “tV” and channel number appear in the sub LCD.
• The squelch is automatically opened. Push [SQL] to toggle be-
tween squelch open and audio mute conditions.
e Rotate [DIAL] to select the desired channel.
• Rotate [DIAL] while pushing [FUNC] to select the skip channel.
◊
Skip channel setting
Unwanted channels can be skipped for rapid selection, etc.
q Rotate [DIAL] to select the channel to be skipped.
• To clear the skip setting, rotate [DIAL] while pushing [FUNC] to
select a skip channel.
w While pushing [FUNC], push [(V/M) SKIP] for 2 sec. to tog-
gle the condition between non-skip and skip channel.
• No indication : channel will not be skipped.
• “ " ” appears : channel skipped during selection.
To select a skip TV channel temporarily, rotate [DIAL] while
pushing [FUNC].
◊
Automatic TV channel programming
TV channels can be programmed automatically.
q Push [FUNC] + [ ↔ ] for 2 sec. to start TV channel pro-
gramming.
w The programming will automatically stop after scanning all
channels.
FM W
RX