Icom COMMUNICATIONS RECEIVER IC-R3 - Manual (Page 39)

35
11
TV OPERATION
◊
TV frequency (AM TV) receiving
You can set the TV frequency instead of channel selection, if
desired.
q Push [FUNC] + [ ↕ ] for 2 sec. to turn the color LCD ON, if
desired.
• The audio part of the TV contents can be received when the
color LCD is turned OFF.
w Push [ ↔ ] one or more times to select the band above 30
MHz.
• TV receiving does not function for less than 30 MHz.
e Push [FUNC] + [ ↕ ] one or more times to select the TV
screen.
• “tV” and frequency appear in the sub LCD.
• The squelch is automatically opened. Push [SQL] to toggle be-
tween squelch open and audio mute conditions.
r Rotate [DIAL] to set the desired frequency.
• Push [ ↔ ] one or more times to select the band.
• Rotate [DIAL] while pushing [FUNC] for dial select step. (p. 39)
◊
TV frequency (AM TV) memory channel
The receiver has 10 memory channels for storage of often-
used TV (AM TV) frequencies.
q Set the desired frequency with [DIAL].
• Push [ ↔ ] one or more times to select the band.
• Rotate [DIAL] while pushing [FUNC] for dial select step. (p. 39)
w Push [V/M] for 1 sec. to indicate memory channels.
• Do not hold [V/M] for more than 2 sec., otherwise the previously
selected memory channel will be overwritten.
e Rotate [DIAL] to select the desired channel.
r Push [V/M] for 1 sec. to program.
• Keep pushing for 2 sec. or more to automatically select the next
memory channel, if desired.
Memory programming after selection, memory transferring
or memory clearing can be used as same manner of regu-
lar memory channels. (pgs. 15, 16)
FM W
RX
FM W
RX