Icom COMMUNICATIONS RECEIVER IC-R3 - Manual (Page 59)

55
17
SPECIFICATIONS AND OPTIONS
AM (at 10 dB S/N) 0.495–4.995 MHz 1.4 µV
5.0–29.995 MHz 1.0 µV
118–136.000 MHz 0.79 µV
222–329.995 MHz 1.0 µV
• Selectivity :
FM, AM More than 12 kHz/–6 dB
Less than 30 kHz/–50 dB
WFM More than 150 kHz/–6 dB
• Audio output power : 100 mW typical at 10%
(at 4.5 V DC) distortion with an 8
Ω
load
• SP connector : 3-conductor 3.5 (d) mm
( 1 ⁄
8
˝)/8
Ω
• Audio/Video connector : 3-conductor 3.5 (d) mm ( 1 ⁄
8
˝)
◊
Operating periods (Approx.)
* Operating periods depend on batteries used.
◊
Options
BC-135 DESKTOP CHARGER
Used for rapid charging of Li-Ion battery pack. Charging time:
2.5 hours. An AC adapter is supplied with the charger.
BC-136A/D BATTERY CHARGER
Regularly charges a Li-Ion battery pack.
BP-206 Li-Ion BATTERY PACK
3.7 V/1650 mAh Lithium Ion battery pack. Same as supplied
one.
CP-18A/E CIGARETTE LIGHTER CABLE
Allows you to operate the receiver through a 12 V cigarette
lighter socket, and also charges a Li-Ion battery pack regu-
larly. A DC-DC converter is built-in.
LC-151 CARRYING CASE
Helps protect the receiver from scratches, etc.
SP-13 EARPHONE
Provides clear receive audio in noisy environments.
CS-R3 CLONING SOFTWARE + OPC-478 CLONING
CABLE
Allows you to transfer data from memories, etc. and quickly
and easily edit and store data via a PC (for Microsoft
® Win-
dows ® 95 and 98).
OPC-474 CLONING CABLE
Used for receiver-to-receiver cloning.
TV reception
color LCD ON
Rated output
backlight OFF
Power save
BP-206 1 hr. 45 min.
45 min.
50 min.
2 hrs. 10 min.
57 min.
60 min.
25 hrs. 30 min.
27 hrs. 30 min.
12 hrs. 50 min.
Alkaline batteries*
Ni-Cd batteries*
All stated specifications are subject to change without
notice or obligation.
Microsoft® and Windows® are registered trademarks of Microsoft Corporation
in the U.S.A and other countries.