Icom COMMUNICATIONS RECEIVER IC-R3 - Manual (Page 40)

36
11
TV OPERATION
■ ATV operation
The IC-R3 ATV-type can receive an amateur TV (FM TV)
within 900–1300 and 2250–2450.095 MHz. The received
video and audio can be output from [A/V OUT] if desired. (p.
5)
q Push [FUNC] + [ ↕ ] for 2 sec. to turn the color LCD ON, if
desired.
• Only the audio part of the TV contents can be received.
w Push [ ↔ ] one or more times to select the 1200 or 2400
MHz bands.
e Push [FUNC] + [ ↕ ] one or more times to select the ama-
teur TV screen.
• “FtV” and frequency appear in the sub LCD.
• The squelch is automatically opened. Push [SQL] to toggle be-
tween squelch open and audio mute conditions.
r Rotate [DIAL] to set the desired frequency.
The video display mode can be selected as positive and
negative depending on the received signal. Push [MODE]
to toggle the display mode, if desired.
◊
ATV memory channel
The receiver has 50 memory channels for storage of often-
used ATV (Amateur TV) frequencies.
q Set the desired frequency with [DIAL].
• Push [ ↔ ] to select the 1200 or 2400 MHz band.
• Rotate [DIAL] while pushing [FUNC] for dial select step. (p. 39)
w Push [V/M] for 1 sec. to indicate memory channels.
• Do not hold [V/M] for more than 2 sec., otherwise the previously
selected memory channel will be overwritten.
e Rotate [DIAL] to select the desired channel.
r Push [V/M] for 1 sec. to program.
• Keep pushing for 2 sec. or more to
automatically select the next mem-
ory channel, if desired.
Memory programming after selection, memory transferring
or memory clearing can be used as same manner of regu-
lar memory channels. (pgs. 15, 16)
◊
Sub carrier adjustment
q Push [FUNC] + [ ↔ ] for 2 sec. to enter sub carrier set
mode.
w Push [ ↔ ] or rotate the tuning dial
while pushing [FUNC] to adjust
sub carrier for better audio re-
ceiving.
e Push [ ↔ ] to exit sub carrier set mode.
FM W
RX
FM W
RX
RX