Cables, Hinges on printer cover – Intermec PK80 User Manual
Page 15
Introduction
—
Chapter 1
3
PK80 Series 80-Column User’s Manual
Cables
Communications to the printer is centered around radio technology, such
as a Bluetooth PAN (Personal Area Network) radio module. This will al-
low for new vehicle configurations.
The Fixed Mount Printer has a 12-volt dc power cable at the bottom of
the printer, which connects the printer to a power source, such as the ve-
hicle battery.
The printer also communicates with an Intermec
®
700 Series Mobile
Computer through an RS-232 DB25-pin data communications cable also
found on the bottom of the printer.
DC power cable
RS-232 DB25-pin data communications cable
Hinges on Printer Cover
All printer covers are hinged to the printer. These hinges have a tension
screw (turn clockwise to tighten, turn counterclockwise to loosen), should
you need to adjust them.