Intermec PK80 - Manual (Page 18)

Introduction Chapter
—
1
6 PK80 Series 80-Column User’s Manual
Remote Connections
A printer and a mobile computer, using the Personal Area Network (PAN)
radio, can operate while up to 30 feet (10 meters) apart.
User Panel
The printer user panel is located in the center top of the printer and has
three buttons and two Light-Emitting Diodes (LEDs).
Forward
Button
Reverse
Button
Radio Button
Radio LED
Power LED
Forward and Reverse Buttons
Use the Forward and Reverse buttons as follows:
Forward (Left) Button
S Press this button to power on the printer.
S Press this button to feed one line.
S Press and hold this button longer to feed up to five lines, one line at a
time.
S Press and hold this button longer than five feed lines to do a Form Feed,
which moves the paper to the top of the next page, or form. Press this
button again during a Form Feed to stop the paper feed.
S Press and hold this button longer than a Form Feed to perform a self-
test. See Chapter 4, “Troubleshooting,” for more information about this test.
S Press this button any time during a printing job to cancel the current
print job. The print buffer is flushed, all automatic reporting is can-
celled, and the printer is ready to print again.
S When there is a paper out, press this button to clear the paper out
mode. Insert the paper, then continue to press this button to feed the
paper into the printer.
Reverse (Right) Button
S Press this button to power on the printer.
S Press and hold this button to do a Back Feed, which pulls the paper
back into the printer line-by-line.
Both Forward and Reverse Buttons
Press both buttons to power off the printer. The current print buffer is
flushed and all automatic reporting is cancelled.