Load paper into printer, Position the paper – Intermec PK80 User Manual
Page 31
Operation
—
Chapter 2
19
PK80 Series 80-Column User’s Manual
Load Paper into Printer
Follow these steps to load the paper into the printer, or paper jams
may occur.
Paper for the PK80 Series Printer has perforated strips that fit onto the
pinfeed holder pins, guiding the paper into the printer. This paper is sold
separately in 1-, 2-, or 3-ply forms. See “Inside Sales” in Chapter 1 for order-
ing information and part numbers.
Position the Paper
1
Open the pinfeed holders outward.
2
Take the top edge of the sheet of paper and position it, original side fac-
ing down, over the pinfeed holder pins.
3
Align the first few holes of the paper, on each side of the paper, onto the
pinfeed holder pins.
4
Close the pinfeed holders.
5
Raise the paper bail.
Note: Go to the next page to adjust the pinfeed holders.