Intermec PK80 - Manual (Page 24)

Operation Chapter
—
2
12 PK80 Series 80-Column User’s Manual
Check List
Make sure the following tasks are done:
S Printer is unpacked.
S Packaging material is removed from around the printer. Save the box
and materials for future use, such as servicing, relocations, etc.
S Twist tie is removed from the print head.
S Power cable is hooked up to the vehicle battery or power source.
S Printer is mounted in the vehicle.
The following tasks must be done. Specific instructions for these tasks are
described on the pages given:
1 Install the ribbon cartridge (page 13).
2 Load the paper into the paper tray (page 15).
3 Feed the paper into the printer (starting on page 19).
Note: Complete these tasks before starting any printer operations.
Open the Printer
To open the PK80 Series Printer, place your hands on both corners, fin-
gers under the lips, and lift upwards. To close, simply press down on the
same areas.