Intermec PK80 - Manual (Page 77)

Graphics Printing Appendix
—
C
65 PK80 Series 80-Column Printer User’s Manual
Line Spacing
To print figures taller than eight dots on 9-Pin printers, the print head
makes more than one pass. The printer prints one line, then advances the
paper and prints another, just as it does with text.
To keep the print head from leaving gaps between the graphics lines as it
does between the text lines, the line spacing must change to eliminate the
space between lines. With a change in line spacing, you can produce finely
detailed graphic images that give no indication that they are made up of
separate lines.
ESC 0 — Select 1/8-inch Line Spacing
This control code sequence sets the line spacing to 1/8 of an inch for sub-
sequent line-feed commands.
Hexadecimal Format
1b 30
ESC 1 — Select 7/72-inch Line Spacing
This control code sequence sets the line spacing to 7/72 of an inch for sub-
sequent line-feed commands.
Hexadecimal Format
1b 31
ESC A — Select n/72-inch Line Spacing
This control code sequence sets the line spacing to n/72 of an inch for sub-
sequent line-feed commands. The variable n must be from 0–85.
Hexadecimal Format
1b 41 n
ESC 2 — Select 1/6-inch Line Spacing
This control code sequence sets the line spacing to 1/6 of an inch for sub-
sequent line-feed commands. This is the default line spacing at power on.
Hexadecimal Format
1b 32
ESC 3 — Select n/216-inch Line Spacing
This control code sequence sets the line spacing to n/216 of an inch for
subsequent line-feed commands. The variable \fln must be from 0–255.
Hexadecimal Format
1b 33 n