JVC KD-DV5000 - Manual (Page 46)

ENGLISH
46
DVD
Items For what and options
DIGITAL AUDIO OUTPUT Select the signal format to be emitted through the DIGITAL OUT
(Optical) terminal on the rear.
• PCM ONLY
Select this when connecting an amplifier or a decoder
incompatible with Dolby Digital and DTS, or connecting to a
recording device.
• DOLBY DIGITAL/PCM
Select this when connecting an amplifier or a decoder compatible
with Dolby Digital.
• STREAM/PCM
Select this when connecting an amplifier or a decoder compatible
with Dolby Digital and DTS.
ANALOG DOWN MIX When playing back a multi-channel DVD disc, this setting affects the
sounds reproduced through the analog terminals.
• STEREO
Normally select this to enjoy and reproduce conventional 2-
channel stereo sound from the original multi-channel sounds.
• DOLBY SURROUND
Select this when you want to enjoy multi-channel surround audio
by connecting an amplifier compatible with Dolby Surround to this
receiver.
D.RANGE COMPRESSION You can enjoy a powerful sound at low or middle volume levels while
playing a Dolby Digital software.
• AUTO: Select this to apply the effect to multi-channel encoded
software (excluding 1 channel and 2 channel software).
• ON: Select this to always use this function.
A
UDIO
EN43-46DV5000[J]f.p65 03.3.23, 17:30 46