JVC KD-DV5000 - Manual (Page 71)

71
ENGLISH
Remedies
Insert discs into the magazine.
Insert discs correctly.
Insert playable discs.
Insert a disc that contains
MP3 files.
Insert the magazine.
Connect this unit and the
CD changer correctly and
press the reset button on the
CD changer.
Press the reset button on the
CD changer.
Press the reset button on the
panel holder after detaching
the control panel. (The clock
setting and preset stations
stored in memory are
erased.) (See page 2.)
Causes
No disc is in the magazine.
Discs are inserted upside down.
Discs are unplayable.
The current disc does not
contain any MP3 files.
No magazine is loaded in the
CD changer.
This unit is not connected to the
CD changer correctly.
The built-in microcomputer may
function incorrectly due to
noise, etc.
Symptoms
• “No Disc” flashes on the
display.
• “No Magazine” flashes on
the display.
• “Reset 8” flashes on the
display.
• “Reset 1” – “Reset 7”
flashes on the display.
• The CD changer does not
work at all.
CD Changer
Output signals through the DIGITAL OUT terminal
They differ depending on the “DIGITAL AUDIO OUT” setting on the Setup Menu.
* While playing some DVDs, digital signals may be emitted at 20 bits or 24 bits (at their original bit rate)
through the DIGITAL OUT terminal if the discs are not copy-protected.
Playback Disc
Output Signals DIGITAL AUDIO OUT
PCM ONLY STREAM/PCM DOLBY DIGITAL/PCM
DVD 48 kHz, 16/20/24 bit Linear PCM
96 kHz, Linear PCM
with Dolby Digital
with DTS
Video CD, Audio CD
Audio CD with DTS
MP3 Linear PCM
48 kHz, 16 bit Linear PCM Dolby Digital bitstream
48 kHz, 16 bit Linear PCM
None
DTS bitstream 48 kHz, 16 bit Linear PCM
DTS bitstream 44.1 kHz, 16 bit Linear PCM
44.1 kHz, 16 bit Linear PCM
*
EN66-73DV5000[J]f.p65 03.3.23, 17:36 71