Recording resume function, Instant timer recording – JVC HR-J785EK User Manual
Page 20
basic features
20
Recording Resume Function
If there is a power cut during recording (or Instant Timer Recording or timer
recording), the recording will resume automatically when power is restored to
the VCR unless the VCR’s memory backup has expired.
Instant Timer Recording
This method allows you to quickly set the VCR to record in 30 minute incre-
ments.
start recording
Press T on the VCR once. If left in this state, the VCR will
keep recording until the tape runs out.
engage instant timer recording
Press T again and the display panel will
show a flashing Record indicator (U) and ‘0:30’. This means that the VCR will
record for 30 minutes on the programme already selected and then stop auto-
matically.
increa se time
Each time T is pressed, the time limit is increased by 30 min-
utes to a maximum of 6 hours.
This function only works with the T button on the VCR, not the Remote
Control.