JVC HR-J785EK - Manual (Page 33)

advanced features 33
Finding Specific Scenes
Skip Search
Press 3 up to 4 times. Each press of the 3 button will cause the VCR to go
into fast-motion playback for a period of 30 seconds. Normal playback resumes automatically.
• To return to normal playback during a Skip Search, press ..
Index Search
Each time you record a programme, this VCR puts an index marker at the point that you started
recording. The VCR can fast wind to any one of nine index markers in either direction from the
point that you stop the tape.
finding first index marker
Press D or E once. The TV screen will display [ 1 or ] 1
and the VCR begins searching through the tape in the corresponding direction for the first index
marker from its current position.
finding subsequent index markers
Press D or E the required number of times (e.g.
five). The TV screen will display [ 5 or ] 5 and the VCR begins searching through the tape in
the corresponding direction for the fifth index marker from its current position.
Instant ReView
Pressing the rbutton causes the VCR to turn on,
rewind to the beginning of the last timer-recorded programme
and begin playback. The display panel tells you how many timer-
recorded programmes are on the tape. If you have three, the
REVIEW indicator and ‘
3 ’ blink on the display panel. To watch the first of these three
programmes, press rthree times. You can move back up to nine programmes from
your current position.
timer mode
Instant ReView will not work while the VCR is in Timer mode.
auto satellite progr amme recording
If Auto Satellite Programme Recording has been used
to record the programmes, the number of recorded programmes will not be displayed on the
display panel.
VCR
SAT
REVIEW