JVC HR-J785EK - Manual (Page 36)

advanced features 36
Satellite Receiver
Control Settings
The following procedure is required if you receive satellite channels through
a satellite receiver. Around 20 seconds before the VIDEO Plus+ timer record-
ing or Manual timer recording starts, the VCR sets its input mode to L-2 and
automatically switches the satellite receiver’s channels using the provided
Satellite Controller.
Installing Satellite Controller
situate satellite controller
Place
the Satellite Controller so that the path
between its transmitter and the satellite
receiver’s remote sensor is unobstructed.
attach satellite controller
Fix
securely using the adhesive strip at-
tached on the back of the Satellite
Controller.
connect up Be sure to connect the
recorder’s AV2 (L-2) IN/DECODER
connector to the satellite receiver’s 21-
pin SCART connector.
note When connecting your satellite
receiver, refer to its instruction manual.
connect satellite controller to
vcr
Connect the Satellite Controller to
the SAT CONTROL connector on the rear
panel.
DECODER VCR TV
Satellite Receiver
Satellite Controller
(suggested locations)
Your VCR
Satellite Receiver
Satellite Controller
Your VCR
Transmitter