Janome MEMORY CRAFT 4800 - Manual (Page 22)

21
• Drawing up the bobbin thread
[1] Raise the presser bar lifter, hold the end of the
thread as shown.
[2] Press the Up/down needle position button twice to
pick up the bobbin thread.
Draw up the needle thread together with a loop of
bobbin thread.
1 Up / down needle position button
[3] Pull both threads under the presser foot and to the
back of the presser foot leaving clear 10 to 15 cm
(4” to 6”) of the threads.
2 Needle thread
3 Bobbin thread
1
2
3
[1]
[2]
[3]