Janome MEMORY CRAFT 4800 User Manual
Page 54
53
Cording
1
Stitch pattern:
46
2
Presser foot:
Cording foot H
Sew over one strand of cording to create a pretty swirled
design on a jacket or vest or sew over three strands of
cording for border trims. Pearl cotton, knitting yarn,
embroidery floss, lace thread, fine wool or lily yarn can
be used for cording.
(Triple cording)
[1]
Mark the design on the right side of the fabric.
Slide the sewing threads to the left and insert three
strands of cording into the slots of foot H with 10 cm
(4ý) extending behind the foot.
[2]
The slot on foot H will hold the lengths of cording in
place while the stitches form over the cording.
[3]
Stitch slowly and smoothly turning the fabric as you
sew while guiding the cording over the marked line.
* You may want to reduce the pressure when sewing
curves.
(Single cording)
1
Stitch pattern:
05
2
Presser foot:
Cording foot H
Use the center groove on the foot and adjust the zigzag
width to overlap the cord and sew.
1
2
1
2
[1]
[2] [3]