Janome MEMORY CRAFT 4800 User Manual
Page 39
38
•
Sensor buttonhole 09 and 10
1
Stitch pattern:
09 or 10
2
Presser foot:
Automatic buttonhole R
* Sewing procedure is the same as 08.
[1]
Sewing steps
3
Starting point
4
Bartacking
5
Stitch pattern 10
•
Adjusting the stitch width and density in
buttonholes 09 and 10
[To change the stitch density]
The adjustment of the stitch density is between 0.2 to
0.8 the same as buttonhole 08.
Adjustment of the stitch width on buttonhole 09
When you press the zigzag width key, the pre-set
buttonhole width is set for the rounded buttonhole at 4.0.
Press “+” or “-” to adjust the stitch width of the entire
buttonhole between 2.5 to 5.5.
6
Width: 2.5
7
Width: 4.0
8
Width: 5.5
Adjustment of the stitch width on buttonhole 10
When you press the zigzag width key, the pre-set
buttonhole width is set for the keyhole buttonhole at 7.0.
Press “+” or “-” to adjust the stitch width of the entire
buttonhole between 5.5 to .7.0
9
Width: 5.5
10
Width: 6.0
11
Width: 7.0
[1]
1
2
3
4
5
3
4
6
7
8
9
10
11