Janome MEMORY CRAFT 4800 - Manual (Page 9)

8
• Mode selection key
By pressing the key, LED light will move step by step to
select the stitch mode, as shown.
Direct Mode: Direct mode pattern selection
A Mode:
Pattern selection using number keys utility
and decorative stitches)
B Mode: Character selection using number keys
(block type)
C Mode: Character selection using number keys
(script type)
• Twin needle key
Just press this button and “A” mark will appear on the
display screen.
Press button again for single needle sewing.
• Editing key
This button can be used for adding, deleting and chang-
ing combinations and monograms before sewing while
programming stitch patterns or monograms.
For editing, use the stitch width “+” or “-” key to select
editing position (see page 61, 62).
[Manual setting function of the zigzag width and stitch
length for programmed patterns]
The individual programmed zigzag pattern width or
stitch length can be changed (see page 63).
• Stitch width selection key
Press “+” or “-” to change the stitch width.
• Stitch length selection key
Press “+” or “-” to change the stitch length.
4
5
6
7
8
Direct Mode
A
A Mode B Mode C Mode