Jaguar SEMCON JLR XJ - Manual (Page 117)

R
(FM8) SEMCON JLR OWNER GUIDE VER 1.00 NAS
LANGUAGE: english-NAS-en; MARQUE: jaguar; MODEL: XJ
Portable media
117
• Touch and hold to scan backwards
through the current track. Playback will
resume when the soft key is released.
8. Repeat:
• Select to repeat the current folder
(USB) or repeat playlist (iPod).
• Select again to cancel Repeat mode.
Note: Repeat mode is not available for
Bluetooth® devices.
Note: Selecting Shuffle (10) will
cancel Repeat mode.
9. Pause/Play: Select to pause playback.
Select again to resume playback.
10. Shuffle:
• Select once to play random tracks in
the current folder (USB) or playlist
(iPod). Shuffle folder or Shuffle
playlist is displayed.
• Select again to play random tracks
from all folders (USB). Shuffle all is
displayed.
• Select again to cancel Shuffle mode.
Note: Shuffle mode is not available for
Bluetooth® devices.
PLAYING A PORTABLE DEVICE
If you are using a USB mass storage device or
approved iPod, you can control playback using
the touch screen controls.
If you are using a Bluetooth® device, you can
control playback using the touch screen, but
some controls are unavailable.
If you are using any portable media device via
the AUX socket, then you must control
playback from the device itself.
CONNECTING MULTIPLE DEVICES
Do not plug non-audio devices into the USB
port.
You can connect multiple devices
simultaneously to the portable media interface
and switch between them using the touch
screen. Select iPod, USB, Bluetooth or AUX, to
switch between modes.
The device docked first will remain the active
device until you choose to change.
If, after changing to the newly-docked device,
you change back to the first device, play will
resume at the point you left it (USB and iPod
only).
Note: You cannot use a USB hub to connect
more than one USB device to the audio unit.
Note: Devices connected to the iPod and USB
ports will be charged, but devices that are fully
discharged will not play.
Note: Options such as Repeat and Shuffle
relate to the device currently playing; they will
not apply to any subsequent device.
PAIRING AND CONNECTING USING
THE MEDIA PLAYER
For further information on Bluetooth®, see
130, BLUETOOTH® INFORMATION.
Note: The process of pairing and connecting
your media player with the vehicle using the
media device will vary depending on the type of
media player.
1. Switch on the ignition and ensure the touch
screen is active.
2. From the My music menu, select
Bluetooth, then select Use device.
Note: The vehicle’s Bluetooth® system is
only discoverable for 3 minutes.