Jaguar SEMCON JLR XJ - Manual (Page 21)

R
(FM8) SEMCON JLR OWNER GUIDE VER 1.00 NAS
LANGUAGE: english-NAS-en; MARQUE: jaguar; MODEL: XJ
Head restraints
21
Head restraints FRONT HEAD RESTRAINTS
Head restraints are designed to support the
head, not the back of the neck. The head
restraint must be positioned correctly to
restrain rearward movement of the head in
the collision.
While stationary, adjust the head restraint so
that the top of the head restraint is above the
center line of the head. An incorrectly
adjusted head restraint increases the risk of
death or serious injury in the event of a
collision.
It is posible to swivel the head restraint
forwards or backwards. For greater
protection in the event of a collision, the head
restraint should be adjusted so that it is as
close to the back of the head as is practical.
ELECTRIC FRONT HEAD RESTRAINTS
1. To adjust the height of the head restraint,
see 16, ELECTRIC SEATS.
2. To adjust the angle of the head restraint,
press the locking button on the side of the
restraint and tilt to the desired position.
Note: There is no angle adjustment on
headrests where a DVD screen is fitted.
1. Pull the wing heads forward in to the first
or second position.
2. Rotate the head restraint to adjust the
angle.
Note: There is no angle adjustment on
headrests where a DVD screen is fitted.
3. To adjust the height of the head restraint,
see 16, ELECTRIC SEATS.
Note: It is not possible to remove the electric
front head restraints.
REAR HEAD RESTRAINTS
It is possible to swivel the head restraint
forwards or backwards. For greater
protection in the event of a collision, the head
restraint should be adjusted so that it is as
close to the back of the head as is practical.
Do not drive or carry passengers with the
head restraint removed from an occupied
seat. The absence of a correctly adjusted
head restraint increases the risk of neck
injury in the event of a collision.