Jaguar SEMCON JLR XJ - Manual (Page 165)

R
(FM8) SEMCON JLR OWNER GUIDE VER 1.00 NAS
LANGUAGE: english-NAS-en; MARQUE: jaguar; MODEL: XJ
Fluid level checks
165
Fill with Jaguar Windshield Washer Fluid,
diluted with clean water, as specified in the
instructions on the bottle. Using a
non-approved fluid may adversely affect the
wiper blade rubber, resulting in ineffectual and
noisy wiping.
Operate the washers periodically to check that
the nozzles are clear and properly directed.
TOPPING UP THE WASHER FLUID
Note: National or local regulations may restrict
the use of Volatile Organic Compounds (VOCs)
which are commonly used as antifreeze agents
in washer fluid. A washer fluid with limited VOC
content should be used only if it provides
adequate freeze resistance for all climates in
which the vehicle is operated.
1. Clean the filler cap before opening to
prevent dirt from entering the reservoir.
2. Open filler cap.
3. Top-up the reservoir until the fluid is visible
in the filler neck.
4. Close filler cap.