Jaguar SEMCON JLR XJ - Manual (Page 94)

L
(FM8) SEMCON JLR OWNER GUIDE VER 1.00 NAS
LANGUAGE: english-NAS-en; MARQUE: jaguar; MODEL: XJ
Parking aids
94
PARKING AID VOLUME
To set the volume of the parking aid warning
tones:
• Select Setup from the touch screen Home
menu, then select System.
• Select Volume presets, then use the + or -
soft keys alongside Parking aid to adjust
volume for both front and rear warning
tones.
REAR FITTED ACCESSORIES
Particular care must be taken when reversing
with rear fitted accessories, as the rear parking
aid will only indicate the distance from the
bumper to the obstacle.
CLEANING THE SENSORS
For reliable operation, the sensors in the front
and rear bumpers should be kept free from ice,
frost and grime.
Do not clean the sensors with abrasive or sharp
objects or materials.
When using a high pressure spray, only spray
the sensors briefly, from a distance greater
than 8 inches (200 mm).
PARKING AID SYSTEM FAULT
If the system has a fault when engaging reverse
gear or turning on the ignition, a single three
second tone will be heard and the warning
indicator in the parking aid switch will flash for
three seconds before switching off. The system
is automatically disabled.
Note: The parking aid may sound spurious
tones if it detects a frequency tone using the
same band as the sensors (e.g. air brakes).