Jaguar SEMCON JLR XJ - Manual (Page 68)

L
(FM8) SEMCON JLR OWNER GUIDE VER 1.00 NAS
LANGUAGE: english-NAS-en; MARQUE: jaguar; MODEL: XJ
Heating and ventilation
68
7. Rear glass heater: Press to switch on/off.
8. Windshield heater: Press to switch on/off.
9. Air distribution to windshield: Touch to
turn on/off.
10. Air distribution to face: Touch to turn
on/off.
11. Air distribution to feet: Touch to turn
on/off.
12. Sync climate: Select to change all front and
rear passenger climate settings to match
that of the driver’s. Select again or change
a passenger’s settings to cancel.
13. Settings: Select to alter the sensitivity of
the air quality sensor, or to select °F or °C
as the default temperature unit.
14. Front seats: Select to adjust the front seat
temperature, ventilation and massage
settings.
15. Rear climate: Select to view the rear
climate control menu. Select the Back
button to return to the front climate menu.
16. Climate off: Select to switch off the climate
control systems. Select again to turn on.
17. Shows the current status of the left hand
side heated/ventilated seat.
Also press to access the menu for seat
climate control and massage seat.
18. Shows the current status of the right hand
side heated/ventilated seat.
Also press to access the menu for seat
climate control and massage seat.
In addition to the selectable controls, the
climate menu displays symbols that indicate
the status of heating and ventilation functions.
Note: If the climate control system is switched
off, pressing an AUTO button or the Defrost
button, will switch the climate system on.
HEATED GLASS
With the engine running, the front (F) and rear
(R) glass heaters may be switched on and off
in any mode, including with the climate control
system off.
The windshield heater switches off
automatically after 5 minutes, the rear glass
heater after 21 minutes.
In cold ambient conditions, the glass heaters
will switch on automatically when the engine is
started. The glass heaters will also activate
automatically at temperatures below 41°F
(5°C).
RECIRCULATION
• Press briefly to activate timed
recirculation. The button indicator
illuminates when recirculation is on.
• Press and hold the button to activate
continuous recirculation. The button
indicator will flash and then illuminate
constantly.
• To cancel recirculation, press the button
briefly.
When selected, the air is recirculated inside the
vehicle. This helps to maintain a high or low
temperature and is useful for preventing fumes
from entering the vehicle.
Timed recirculation: Recirculation will switch
off automatically after a set time (dependent on
the ambient temperature).
Continuous recirculation: Recirculation will
remain on until the button is pressed again.
Note: Prolonged use at low temperatures may
cause the windows to mist.