Jaguar SEMCON JLR XJ - Manual (Page 118)

L
(FM8) SEMCON JLR OWNER GUIDE VER 1.00 NAS
LANGUAGE: english-NAS-en; MARQUE: jaguar; MODEL: XJ
Portable media
118
3. Using the media player, search for
Bluetooth® devices. On some media
players this is referred to as new paired
device. See your media player’s operating
instructions for further information.
4. When the vehicle’s Bluetooth® system is
discovered (named Jaguar XJ), follow the
on-screen instructions. Select Yes when
prompted, to confirm the pairing.
5. When prompted, enter the Bluetooth® PIN
(Personal Identification Number) and
select OK to confirm.
Note: The vehicle’s Bluetooth® PIN must
be the same number as entered on the
media player.
6. Once your media player is paired and
connected to the system, a confirmation
message will be displayed, before the
control screen is shown.
Note: Some media players do not
automatically connect and need to be
manually connected, via the device or by
using the Change device option.
PAIRING AND CONNECTING A
BLUETOOTH® DEVICE USING THE
TOUCH SCREEN
For further information on Bluetooth®, see
130, BLUETOOTH® INFORMATION.
1. Switch on your media player’s Bluetooth®
connection, using the media player’s
menu. Make sure that your media player is
in Bluetooth® ‘discoverable’ mode,
sometimes referred to as ‘find me’ mode
(see your media player’s operating
instructions for more information).
2. Switch on the ignition and ensure the touch
screen is active.
3. From the My music menu, select
Bluetooth, then select Search new.
4. Identify your media player from the
displayed list and select the corresponding
Pair and connect option.
5. When prompted, enter the 4-digit code into
your media player (see your media player’s
operating instructions for more
information).
6. Once your media player is paired and
connected to the system, a confirmation
message will be displayed, before the
control screen is shown.
Note: Due to the duration of a Bluetooth®
search, it is advised that the timeout to home
screen feature is switched off before
attempting to search for Bluetooth® devices.
This setting can be changed within Vehicle,
Syst. settings, Display set.
AUTOMATIC BLUETOOTH
RECONNECTION
If devices have already been paired and
connected, when Bluetooth is selected from
the My music menu, the system will
automatically connect to the last used device (a
confirmation pop-up appears). If the last used
device is not present, then the system will
search for other previously connected devices
and automatically connect if one is found.
If no previously connected device is found, No
device connected is displayed and the Search
new, Change device and Use device options
are given.
LOSS OF CONNECTION
If a loss of connection between the vehicle and
the Bluetooth device occurs, a pop-up is
displayed. Select Reconnect to automatically
restore the connection. A confirmation pop-up
will appear before the touch screen reverts to
its previous mode.