Rear view – JVC DR-M7S User Manual
Page 11
Masterpage:Right-No-Heading
EN
11
Filename [DR-M7SE_06Name.fm]
Page 11
March 26, 2004 3:52 pm
REAR VIEW
A Antenna Input Connector (ANTENNA IN)
B Component Video Output Connectors
(COMPONENT VIDEO OUT )
C S-video Output Connector (S-VIDEO OUT)
D Audio Output Connectors
(AUDIO OUT (RIGHT/LEFT))
E AV COMPU LINK Connector*
* Not function with this unit.
F Digital Audio Output Connectors
(DIGITAL OUT (COAXIAL/OPTICAL))
G Cooling Fan
● This prevents the temperature from rising inside the unit.
Do not remove it.
● Install the unit so as not to block the area around the fan.
● The cooling fan on the rear of the unit may be activated even if the
unit is turned off in the following cases;
—
In the timer Auto Satellite Programme Recording standby mode
pg. 63, slightlybefore the starting time of VPS/PDC recording
—
If you record the decoder or the satellite receiver to L-2 IN/
DECODER and if “L-2 SELECT” is set to “DECODER” or “SAT
VIDEO” or “SAT S-VIDEO”.
—
—
Set “JUST CLOCK” to “OFF” if you mind the noise of the fan.
H Mains Power Cord
I Antenna Output Connector (ANTENNA OUT)
J L-1 Input/Output Connector (L-1 IN/OUT)
K L-2 Input/Decoder Connector
(L-2 IN/DECODER)
L Satellite Control Connector (SAT CONTROL)
M Region Number Label
DR-M7SE_01.book Page 11 Friday, March 26, 2004 4:27 PM