S-video connection, Pg. 17 – JVC DR-M7S User Manual
Page 17
Masterpage:Right-No-Heading
EN
17
Filename [DR-M7SE_06Name.fm]
Page 17
March 26, 2004 3:52 pm
S-VIDEO
Connection
8 To connect to TV’s S-VIDEO input and AUDIO input
connectors
A
Connect the unit to a TV.
A Connect the aerial, unit and TV as per “Basic
B Connect the unit’s S-VIDEO OUT connector to the
TV’s S-VIDEO input connector.
C Connect the unit’s AUDIO OUT connectors to the
TV’s AUDIO input connectors.
B
Connect the unit to mains.
Connect the AC plug of the mains power cord into a
mains outlet.
NOTES:
● You can obtain high-quality S-VHS pictures.
● With S-VIDEO connection, you cannot use the Preset
● If your TV is not stereo-capable, use the unit’s AUDIO OUT
connectors to connect to an audio amplifier for Hi-Fi stereo
sound reproduction.
● For switching the TV’s video input mode, refer to the
instruction manual of your television.
Back of TV
Aerial
connector
S-VIDEO input
connector
AUDIO input connectors
S-Video cable
(not provided)
Audio cable (not provided)
Mains outlet
Mains power cord
Back of unit
RF cable (provided)
S-VIDEO OUT
AUDIO OUT
TV aerial cable
ANTENNA IN
ANTENNA OUT
After the connection is completed, perform “Auto Set
Up” on page 19.
DR-M7SE_01.book Page 17 Friday, March 26, 2004 4:27 PM