JVC DR-M7S - Manual (Page 97)

Masterpage:Right-No-Heading
EN
97
Filename [DR-M7SE_11Subsidiary.fm]
Page 97 March 26, 2004 4:25 pm
F
View the Confirmation screen.
“SCAN COMPLETED” is
displayed on the TV screen.
Press “OK”, then the
Confirmation screen appears.
The confirmation screen lists
the channel position number
(PR), station channel number
(CH), and station name (ID)
(
੬
pg. 101, “TV Station And ID List”) of all stored
broadcast stations. The programme currently received on
the selected channel position appears behind the
confirmation screen. To view the next page, press
rt w e.
● The stations located in the selected country appear at the top
of the list.
● The Guide Program numbers will also be set automatically
during Auto Channel Set.
G
Complete the setting.
Press SET UP.
● Using the Confirmation screen, you can skip or add channel
positions, enter station names and perform other operations.
Refer to pages 97 – 100 for the procedures.
● Depending on reception conditions, the stations may not be
stored in order, and the station names may not be stored
correctly.
● For information on scrambled broadcasts, refer to “When
Receiving A Scrambled Broadcast” (
੬
pg. 99).
NOTES:
● Fine tuning is performed automatically during Auto Channel
Set. If you want to perform tuning manually, refer to “Fine-
Tuning Channels Already Stored” (
੬
pg. 100).
● If you perform Auto Channel Set when the aerial cable is not
connected properly, “SCAN COMPLETED –NO SIGNAL–”
appears on the TV screen in step
F. In such a case, make sure
of the aerial connection and press ENTER; Auto Channel Set
will start again.
● If no sound accompanies the picture or the audio sounds
unnatural on some channels that have been stored by Auto Set
Up, the TV system setting for those channels may be incorrect.
Select the appropriate TV system for those channels.
(
੬
pg. 99, “INFORMATION”)
Manual Channel Set
Store channels that were not stored during Auto Set Up
(
੬
pg. 19), Preset Download (
੬
pg. 21) or Auto Channel Set
(
੬
pg. 96).
A
Access the Main Menu screen.
Press SET UP.
B
Access the Confirmation screen.
A Press w e to select “INITIAL SET UP”, then press
ENTER.
B Press w e to select “MANUAL CH SET”, then press
ENTER.
● The Confirmation screen appears.
C
Select the channel position.
IMPORTANT:
● In certain reception conditions, station names may not be
stored correctly, and Auto Guide Program Number Set may
not work properly. When the Guide Programme numbers
are not set properly, the programme that you do not
intended to record will be timer-recorded by the
S
HOW V IEW system of the unit. When programming the
timer using the S HOW V IEW system, be sure to check the
desired channel is selected correctly. (
੬
pg. 54,
“S HOW V IEW ® Timer Programming”)
● Your unit memorises all receivable stations even if
reception of some of them is poor. You can delete those
stations with an unacceptable picture from the list.
(
੬
pg. 98, “Delete A Channel”)
Press rt w e to select a
blank position in which you
want to store a channel, then
press ENTER twice. The
Manual Channel Set screen
appears. (Example) To store in position 12.
The programme currently
received on the selected channel
position appears behind the
confirmation screen.
DVD TV
DVD
TIMER PROG/CHECK
NEXT PREVIOUS
PAUSE REC
REC MODE LIVE CHECK
SET UP DISPLAY ON SCREEN
OPEN/
CLOSE
AUDIO SUBTITLE ANGLE
PROGRESSIVE
SCAN
SLOW SLOW PLAY/SELECT
STOP/ CLEAR
NAVIGATION TOP MENU
RETURN
ENTER
MENU
STANDBY/ON
ABC
JKL GHI MNO
TUV PQRS WXYZ
AUX CANCEL MEMO/MARK
DEF
CABLE/SAT
PR
SAT# SHOW VIEW/
VIDEO Plus+
TV/CBL/SAT TV TV AV
VIDEO
TV%
rtwe
ENTER
SET UP
0 – 9
DR-M7SE_01.book Page 97 Friday, March 26, 2004 4:27 PM