JVC DR-M7S - Manual (Page 99)

Masterpage:Right-No-Heading
EN
99
Filename [DR-M7SE_11Subsidiary.fm]
Page 99 March 26, 2004 4:25 pm
When Receiving A Scrambled
Broadcast
A
Select the decoder mode.
Set “L-2 SELECT” to “DECODER”. (
੬
pg. 81, “L-2 Select
Setting (L-2 SELECT)”)
B
Access the Confirmation screen.
Perform steps A and B of “Manual Channel Set” on
page 97.
C
Select the position.
Press rt w e to select the channel position
broadcasting scrambled programmes, then press ENTER
twice.
D
Change the decoder setting.
A Press rt to select “DECODER”, then press ENTER.
B Press rt to set “DECODER” to “ON”, then press
ENTER.
E
Return to the Confirmation screen.
Press RETURN.
● Repeat steps C – E as necessary.
F
Close the Confirmation screen.
Press SET UP twice.
Set Stations (A)
Set station names that are registered in your unit.
A
Select the item.
Press rt w e to select the item you want.
B
Access the Manual Channel Set screen.
Press ENTER twice.
C
Select the new station.
A Press rt to select “ID”, then press ENTER.
B Press rt until the new station’s name (ID) you want
to store appears, then press ENTER. Registered station
names (
੬
pg. 101, “TV Station And ID List”) appear
as you press rt.
D
Switch the stations.
Press w e to select “OK”, then press ENTER.
● Repeat steps A – D as necessary.
E
Close the Confirmation screen.
Press SET UP twice.
INFORMATION
If you live in Eastern Europe, “TV SYSTEM” setting appears
instead of “DECODER” setting on the Manual Channel Set
screen. When you can see the picture but can hear no audio,
select appropriate TV system (D/K or B/G). Normally, TV
programmes are broadcast as follows.
For Eastern Europe : D/K
For Western Europe : B/G
A Select a country in Eastern Europe in step C on page 96.
B Press rt to select “TV SYSTEM” in step D on page 98.
C Press rt to select appropriate TV System (D/K or B/G).
Perform steps A and B of “Manual Channel Set” on page 97
to access the Confirmation screen before continuing.
DR-M7SE_01.book Page 99 Friday, March 26, 2004 4:27 PM