T-v link, T-v link functions, Tv auto power on – JVC DR-M7S User Manual

Page 28: Unit auto standby, Direct rec

Advertising
background image

Filename [DR-M7SE_06Name.fm]

Masterpage:Left0

28

EN

Page 28

March 26, 2004 3:52 pm

T-V LINK

F

Check the result of the test.

If the satellite receiver’s channel number has not been
changed correctly
Press w e to move the arrow to “NO”, then press ENTER.
Then perform the procedure again from step

D.

NOTES:

● The Satellite Controller may not work with all types of satellite

receiver.

● For some satellite receivers, you need to set its channel input

mode to 2-digit.

● If your satellite receiver has more than two channel modes, be

sure to set to “All Channel Mode”. For details, refer to the
instruction manual of the satellite receiver.

● When selecting the satellite receiver’s channel (

step

E),

signals from the remote control may interfere with signals
transmitted from the Satellite Controller. In this case, move the
remote control as close to the unit’s infrared beam receiving
window as possible.

T-V Link Functions

When you connect the unit to your TV via a fully-wired 21-pin
SCART cable (

pg. 16), the following functions are available.

You can use these functions only with a TV offering T-V Link,
etc.*
For details, refer to the instruction manual of your TV.

* Compatible with TVs offering T-V Link, EasyLink, Megalogic,

SMARTLINK, Q-Link or DATA LOGIC via a fully-wired 21-pin SCART
cable. The degree of compatibility and available functions may differ by
system.

TV Auto Power On

The TV will turn on and be set to its AV mode automatically
whenever you start playback.
For details, refer to the instruction manual of your TV.

Unit Auto Standby

You can use your TV’s remote control to turn off the unit.
For details, refer to the instruction manual of your TV.

Direct Rec

You can easily start recording the programme that you are
watching on your TV. When you use this function, set “DIRECT
REC” to “ON”. (

pg. 92)

If the satellite receiver’s
channel number has been
changed to the same one as
you set in step

E.

Press w e to move the arrow
to “YES”, then press ENTER
to finish the Sat Control Set
mode.

BRAND NAME

CODE

JVC
AMSTRAD
ASTON
CANAL SATELLITE
CANAL +
D-BOX
ECHOSTAR (VIA DIGITAL)
FINLUX
FORCE
GALAXIS
GRUNDIG
HIRSCHMANN
HUMAX
ITT NOKIA
JERROLD
KATHREIN
LUXOR
MASCOM
MASPRO
NOKIA
PACE
PANASONIC
PHILIPS
RADIX
RFT
SABA
SAGEM
SALORA
SAMSUNG
SIEMENS
SKYMASTER
TECHNISAT
THOMSON
TPS
TRIAX
WISI

73
60, 61, 62, 63, 92
97
81
81
85
82
68
89
88
64, 65, 102
64, 78, 99
88
68
75
70, 71, 96
68
93
70
87, 94
65, 67, 74, 86, 92, 97
74, 92
66, 84, 101
78
69
97
83, 90
68
83
64
69, 98
66, 100
97
83
91
64

DR-M7SE_01.book Page 28 Friday, March 26, 2004 4:27 PM

Advertising