Editing, Edit from a camcorder, Pg. 78 – JVC DR-M7S User Manual

Page 78: Make connections, Set the unit’s input mode, Set the recording speed, Prepare the camcorder for dubbing, Start dubbing, Stop dubbing

Advertising
background image

Filename [DR-M7SE_10Editing.fm]

Masterpage:Left0

78

EN

Page 78

March 26, 2004 3:52 pm

EDITING

Edit From A

Camcorder

You can use a camcorder as the source player and your
unit as the recording deck.

A

Make connections.

A If the camcorder has no S-VIDEO output connector:

— connect the camcorder’s AUDIO OUT and VIDEO
OUT connectors to the unit’s AUDIO and VIDEO
input connectors on the front panel.

B If the camcorder has an S-VIDEO output connector:

— connect the camcorder’s AUDIO OUT and
S-VIDEO OUT connectors to the unit’s AUDIO and
S-VIDEO input connectors on the front panel.

● When using a monaural camcorder, connect its AUDIO OUT

connector to the AUDIO L input connector on your unit.

B

Set the unit’s input mode.

Press PR +/– to set the channel to “F-1”.

● Set “F-1 INPUT” to “VIDEO” for the VIDEO input connector,

or “S-VIDEO” for the S-VIDEO input connector, depending on
the connector being used. (

pg. 81, “F-1 Input Setting

(F-1 INPUT)”)

C

Set the recording speed.

Press REC MODE repeatedly until the desired recording
speed appears.

D

Prepare the camcorder for dubbing.

Start playback on the camcorder slightly before the actual
point from where you wish to start dubbing.

E

Start dubbing.

Press and hold 7, then press 4 on the remote control, or
press 7 on the unit.

F

Stop dubbing.

Press 8 on the unit, then stop playback on the
camcorder.

NOTES:

● All necessary cables can be obtained from your dealer.

● Refer to the camcorder’s instruction manual for operating

procedure.

● The quality of dubbed picture becomes poorer than that of the

original.

1 STANDBY/ON

F1

S-VIDEO

VIDEO

L(MONO)-AUDIO-R

REC MODE

1 STANDBY/ON

F1

S-VIDEO

VIDEO

L(MONO)-AUDIO-R

REC MODE

A

If the camcorder has no S-VIDEO output connector:

B

If the camcorder has an S-VIDEO output connector:

Recorder

AUDIO OUT

VIDEO OUT

Camcorder

AUDIO input

Player

VIDEO input

Video cable (not provided)

Recorder

Audio cable (not provided)

S-VIDEO OUT

AUDIO OUT

Camcorder

S-VIDEO input

Player

AUDIO input

S-Video cable (not provided)

Audio cable (not provided)

Slide the TV/CABLE/SAT/DVD switch to DVD.

DR-M7SE_01.book Page 78 Friday, March 26, 2004 4:27 PM

Advertising