JVC DR-MX10SE - Manual (Page 112)

H EN 112
Setup Menu
(continued)
U MOTION INDEX
For setting whether to set the picture on the top left of the Library Database Navigation screen or Editing screen to that of the
selected programme or broadcast screen. If a programme recorded in DV mode is selected during recording or temporary
recording, the broadcast screen will be displayed.
OFF The broadcast screen will be displayed.
ON The selected programme will be displayed.
FUNCTION SET UP > REC/PLAY SET UP
V XP MODE REC AUDIO
For setting the audio mode when recording in XP mode. (This setting is invalid for HDD Y DVD dubbing.)
DOLBY DIGITAL Normal audio mode.
LINEAR PCM High sound quality mode.
W AUDIO REC
Set if recording NICAM bilingual broadcasts.
NICAM Records in bilingual mode.
MONO Records in normal sound mode.
X DIRECT REC
If connected with a TV supporting T-V Link, channels being watched on TV can be recorded instantly.
OFF Disable.
ON Enable.
Y INPUT COLOUR SYSTEM
For selecting the colour format of the image.
PAL When recording input signals in PAL format.
SECAM When recording input signals in SECAM format.
Z JUMP TIME
For setting the jump interval for S/T. [ P44]
15 MIN Jumps in 15-minute interval.
30 MIN Jumps in 30-minute interval.
1 HR Jumps in 1-hour interval.
a PROGRAMME ALERT
A function to warn that there are programmes that cannot be recorded for the weekly/daily timer programming due to
insufficient remaining capacity of the HDD. For setting the period where warning is required. (Displayed when the unit is turned
on.)
OFF No warning.
WITHIN 1 DAY
Warns that there are programmes that cannot be recorded within 1 day, …, within
6 days, within 1 week, …, within 5 weeks.
^ WITHIN 6 DAYS
WITHIN 1 WEEK
^ WITHIN 5 WEEKS
HDD/DVD SET UP > COMMON SET UP
DR-MX10SE.book Page 112 Monday, November 28, 2005 1:11 PM