JVC DR-MX10SE - Manual (Page 44)

H EN 44
Usable Buttons during Playback (HDD/DVD)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
IMPORTANT:
Marks
For HDD, DVD-RAM and
DVD-RW/-R (VR mode)
0 Marks can be set or deleted
during playback.
0 They are automatically
inserted if the audio is
switched from monaural or
bilingual broadcast to stereo
broadcast during recording.
0 ACHAPTERB on the Editing
screen can also be used to
insert marks. [ P83]
For DVD-RW/-R (Video mode)
0 Marks are automatically
inserted approximately every
5 minutes during recording.
The marks will remain even
after finalising.
See AWatching on Other DVD
Players (Finalising)B [ P67].
The following buttons can be used during playback.
Playback
0 Starts playback.
Stop
0 Stops playback and displays the broadcast screen.
0 Memorises the point where playback stops. (Setup
Menu ARESUMEB [ P110] H)
Pause 0 Pauses playback and displays a still image.
Reverse
Search/
Forward
Search
0 Functions during playback.
HDD
• Each press of the button switches the playback
speed in the order of FWD1 - FWD5.
• When not recording, pressing N once activates
playback at 1.5x speed with sound.
• Press O once to reverse playback.
DVD
• Each press of the button switches the playback
speed in the order of FWD1 - FWD4.
• Press O once to reverse playback.
Frame-By-
Frame/
Slow
Motion
Playback
0 Functions during pause.
• Each press of the button advances or reverses one
frame at a time (frame-by-frame playback).
• Pressing down for 2 or more seconds activates
slow motion playback. Each press of the button
changes the playback speed to one of 3 stages in
the order of 1/16, 1/4 and 1/2 times the original.
Skip
0 Moves to the chapter position (mark).
0 Marks can be added during playback using MEMO/
MARK. See AMarkB below.
Jump
0 Jumps according to the selected time interval and
resumes playback. (Setup Menu AJUMP TIMEB
[ P112] Z)
0 Functions when the chapter (mark) is not set.
Skip
Search
0 Skips forward for approximately 30 seconds and
resumes playback.
Pressing repeatedly skips forward continuously as
many times as pressed.
One
Touch
Replay
0 Skips back for approximately 7 seconds and
resumes playback.
Pressing repeatedly skips back continuously as
many times as pressed.
Mark
0 Inserts mark at the desired skip position.
• To insert marks: Press at desired positions during
playback. (Screen display: MARK)
• To delete marks: While in pause mode, press after
using skip buttons to locate the marks to be
deleted. (Screen Display:
)
It is possible to switch between the elapsed time/disc remaining time/programme remaining time display of each programme by
pressing DISPLAY.
MARK
DR-MX10SE.book Page 44 Monday, November 28, 2005 1:11 PM