JVC DR-MX10SE - Manual (Page 78)

H EN 78
Dubbing from VHS to HDD
or DVD (1 Programme)
A
Load the tape to play.
0 When dubbing to a DVD disc, load a recordable
disc.
B
Select “VHS N HDD ” or “VHS N
DVD ” in step
B
of “Dubbing between
HDD and DVD Deck ”, then select “1
PROG. ”. [ P72]
C
Set the recording mode.
A Select the recording mode.
B
Select ACONFIRMB.
0 See ARecording ModeB [ P92]
D
Pause playback at the scene that you
wish to dub.
0 Locate the recording start point with O/N,
then pause playback.
E
Select “EXECUTE”.
If the index signal (VISS) of the VHS is
detected, dubbing ends, and the
broadcast screen appears automatically
after a message is displayed.
To cancel a dubbing that is in progress
A Press STOP/CLEAR ( o).
B Select ACANCELB, then press ENTER.
ABCDEF GHIL M
9 Dubbing only one of the programmes
recorded on a VHS tape to the HDD or a DVD
disc is possible.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
NOTES:
0 When the HDD or DVD disc runs out of disc
remaining time, the tape will automatically stop at that
position and dubbing will cease.
If dubbing to DVD-RW/-R (Video mode)
0 For discs in Video mode, switching of audio during
playback is not possible.
Set to AMAINB or ASUBB in the Setup menu
[ P111] N.
0 Recording will be done using the colour system set in
the VHS SET UP menu ACOLOUR SYSTEMB
[ P115] o regardless of the setting in the Setup
Menu AINPUT COLOUR SYSTEMB [ P112] Y.
STOP
CANCEL
B
,
C
,
E
D
SELECT
CONFIRM
SP
CONFIRM
SELECT
CONFIRM
SELECT
CONFIRM
EXECUTE
DR-MX10SE.book Page 78 Monday, November 28, 2005 1:11 PM