JVC DR-MX10SE - Manual (Page 20)

H EN 20
Receiving via External Receiver
Connect Using SCART Cable
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
IMPORTANT:
0 Signals that are input from the external receiver may not be recordable on VHS.
0 Leave the external receiver on during timer recording standby.
ANTENNA
OUT
IN
LEFT
PCM/
STREAM
RIGHT
COAXIAL G-LINK
L-1
Y
P B
P R
HDD/DVD
COMPONENT
VIDEO OUT
HDD/DVD
OUT AUDIO
IN/OUT
L-2
IN/DECODER
HDD/DVD/VHS
OUT AUDIO DIGITAL
ANT IN EXT IN
ANT IN
TO TV TO VCR
TO TV
JVC
L-1
IN/OUT
L-2
IN/DECODER
G-LINK
ANTENNA
OUT
ANTENNA
IN
TO CABLE OR ANTENNA
SCART cable
(supplied)
RF cable
(not supplied)
RF cable
(supplied)
External receiver
IR blaster (G-LINK)
(supplied)
TV
SCART cable
(not supplied)
*1 Depending on the IR blaster (G-LINK)
connected to G-LINK, the external receiver
can be controlled using the GUIDE Plus+
system.
Do not place obstructions between the IR
blaster (G-LINK) and the external
receiver’s infrared receptor.
*1
DR-MX10SE.book Page 20 Monday, November 28, 2005 1:11 PM