JVC DR-MX10SE - Manual (Page 114)

H EN 114
Setup Menu
(continued)
FUNCTION SET UP > VIDEO IN/OUT
h MONITOR TYPE
Set in accordance with the TV to be connected.
4:3LB
When connected with a 4:3 TV. (Black strips are added to the top and bottom
when displaying a 16:9 image.)
4:3PS
When connected with a 4:3 TV. (The left and right are cropped off when
displaying a 16:9 image.)
16:9AUTO When connected with a wide TV (16:9).
16:9FIX
When connected with a TV fixed at 16:9. (This unit automatically adjust the
screen width when displaying a 4:3 image.)
i F-1 INPUT
Set in accordance with the video connectors to be connected, when using the [F-1] input connectors on the front panel.
VIDEO If connecting video signals (yellow connector).
S-VIDEO If connecting S-Video signals (black connector).
j L-1 OUTPUT
For setting the output signal of the connector in accordance with the connecting device, when using the SCART connector
[L-1] on the rear panel.
SCART VIDEO Outputs video signals.
SCART S-VIDEO Outputs S-Video signals.
SCART RGB Outputs RGB signals.
COMPONENT
Outputs component video signals. (If connecting to the TV via the component
terminal.)
k L-1 INPUT
For setting the input signal of the connector in accordance with the connecting device, when using the SCART connector [L-1]
on the rear panel as a input connector.
VIDEO If connecting video signals.
S-VIDEO If connecting S-Video signals.
l L-2 SELECT
Setting for the SCART connector [L-2] on the rear panel. Mainly for setting the input signals accordingly when connected. Also,
when this unit is turned off, signals of an external tuner can be set to be output from [L-1]. The items that can be set changes
depending on the
AL-1 OUTPUTB setting. [ P29]
VIDEO/RGB If connecting video signals.
S-VIDEO/RGB If connecting S-Video signals.
SAT VIDEO/RGB If connecting video signals with an external tuner.
DECODER If connecting a decoder.
INITIAL SET UP > TUNER SET
For setting receiving channels. [ P36]
INITIAL SET UP > CLOCK SET
For setting the clock. [ P34]
DR-MX10SE.book Page 114 Monday, November 28, 2005 1:11 PM