JVC DR-MX10SE - Manual (Page 36)

H EN 36
Setting Receiving
Channels
A
Access the setup menu.
B
Select “INITIAL SET UP”.
C
Select “TUNER SET”.
D
Select “MANUAL CH SET”.
0 The AMANUAL CH SETB screen will be
displayed.
E
Select “EDIT”.
F
Select a channel that you want to set.
0 A confirmation screen will be displayed.
G
Set the channel.
A
Select and confirm on ABANDB.
0 ACHB is a regular broadcast band, and ACCB is
a cable broadcast band.
B
Select and confirm on ACHB.
0 Select a receiving channel.
C
Select and confirm on AIDB.
0 Select from the ATV Station and ID ListB
[ P116].
0 See AEntering the Station IDB [ P37].
D
Select and confirm on AFINEB.
0 If the reception is poor, press the Selection
Keys (FG) to fine-tune.
E
Select and confirm on ADECODERB.
0 When a decoder is connected, set to AONB.
0 Unable to change the setting other than the
following.
Setup Menu AL-2 SELECTB = ADECODERB
[ P114] l
H
Exit setup.
0 If RETURN is pressed, you will return to the
previous screen, and other channels can also be
set.
9 Usually performed automatically using auto
setup or preset download. If cannot be set
automatically in some regions, set them
manually.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
IMPORTANT:
0 If channel settings are performed manually, the
S
HOW V IEW guide channel will not be set. See
AS HOW V IEW Guide Channel SetB [ P35].
RETURN
A
,
H
B - G
F
F - H
G
SELECT
CONFIRM
MANUAL CH SET
SELECT
CONFIRM
EDIT
SELECT
CONFIRM
----
BAND
CH
ID
FINE
DECODER
CH
2
OFF
RETURN
DR-MX10SE.book Page 36 Monday, November 28, 2005 1:11 PM