JVC DR-MX10SE - Manual (Page 113)

Usef
ul F
eature
s
EN I 113
FUNCTION SET UP > DISPLAY SET
b SUPERIMPOSE
For setting whether to automatically display the operation details on the TV screen.
OFF Do not display.
AUTO Displays for 5 seconds during operations.
c BLUE BACK
For setting whether to display a blue screen, when broadcast cannot be received or if there are no signals at the external input.
Set to
AOFFB when the signals are weak or reception is poor.
OFF
Do not change the screen display.
ON Switch to a blue screen.
d DIMMER (DURING POWER ON)
For setting the brightness of the front display panel when the unit is on.
BRIGHT Bright
DIMMED Dark
e DIMMER (DURING POWER OFF)
For setting whether to light up or turn off the light of the front display panel when the unit is off.
OFF Turns off the light of the front display panel when the unit is off.
ON Lights up the front display panel when the unit is off.
f QUICK STARTUP
If set to AONB, the power consumption during standby increases but operations such as playback can be performed more
quickly than when set to AOFFB.
OFF Usually set to AOFFB. (Standby power consumption: 6.7 W)
ON
Operations can be performed quickly after turning on the unit. (Standby power
consumption: 16.5 W)
g ON SCREEN LANGUAGE
For setting the on-screen display language.
ENGLISH
Sets the language. DEUTSCH, FRANCAIS, ESPAÑOL,
ITALIANO, NEDERLANDS, SVENSKA,
NORSK, SUOMI, DANSK
DR-MX10SE.book Page 113 Monday, November 28, 2005 1:11 PM