Getting started, Continued), English connecting other equipment – JVC CA-HXZ55D User Manual

Page 14: Am ext am loop fm 75 coaxial, Pr pb y video s-video pal ntsc

Advertising
background image

9

English

Connecting Other Equipment

You can connect other equipment such as a digital decoder to
reproduce multi-channel sounds or audio equipment which can be
used as a playback device.
When you connect and use such equipment, refer also to its manual.

• DO NOT connect other equipment while the

power is on.

• DO NOT plug in any equipment until all

connections are complete.

To connect audio equipment with an optical digital
input terminal—such as portable MD recorder

By using an optical digital cord (not supplied), you can connect
audio equipment with an optical digital input terminal.
• Before playing back a disc, select “DIGITAL AUDIO OUTPUT”

in the “AUDIO” menu according to audio equipment connected to
the OPTICAL DIGITAL OUTPUT terminal. (See pages 62 and
68.)

OPTICAL

DIGITAL

OUTPUT

Optical digital cord

Audio equipment with an
optical digital input

To optical
digital input

To connect analog audio equipment

By using an RCA pin plug cord (not supplied), you can connect
equipment with analog audio output jacks such as an MD player, a
TV, etc.
• Be sure that the plugs of the audio cords and the jacks on the rear

of the unit are color-coded:
White plugs and jacks are for left audio signals, and red ones for
right audio signals.

To listen to or to record the sound from analog audio equipment
connected to the AUX IN jacks, select “AUX” as the source to play.
(See page 15.)

AUX

IN

RIGHT

LEFT

MD player, TV, etc.

RCA pin plug cord

Left

Left

Right

Right

To analog audio output

Getting Started

(continued)

To select the color system

You need to select the color system setting of this unit to match
to your TV.

Set the NTSC/PAL switch on the rear while in standby mode
correctly by referring to the table below.

Color system of TV

Color system setting

Multi-color system

PAL or NTSC*

PAL

PAL

NTSC

NTSC

* Set the color system of the unit and TV to match to the

playback disc.

• Before playing back a disc, it is also required to select the correct

“MONITOR TYPE” in the PICTURE menu according to the
aspect ratio of your TV. (See page 61.)

If you play back an NTSC disc with this setting set to
“PAL”

You can watch the playback pictures (the disc will be reproduced
using “PAL 60” format), but the TV screen may rolls over upward
and downward rapidly.

If you play back a PAL disc with this setting set to
“NTSC”

You can watch the playback pictures, but the following symptons
may occur:
• The items on the disc menu will be blurred, and be shown slightly

shifted when highlighted.

• The aspect ratio of the picture may differ from the original aspect

ratio.

• The picture movement is not smooth.

AM EXT

AM

LOOP

FM 75

COAXIAL

COMPONENT

PR

PB

Y

VIDEO

S-VIDEO

PAL

NTSC

VIDEO OUT

AV

COMPU LINK

FRONT
SUBWOOFERS

FRONT
MAIN
SPEAKERS

ANTENNA

CAUTION: SPEAKER IMPEDANCE 6 16

CAUTION:

SPEAKER IMPEDANCE

8 16

CENTER SPEAKER

SURROUND SPEAKERS

CENTER

RIGHT

LEFT

OPTICAL

DIGITAL

OUTPUT

VOLTAGE

SELECTOR

RIGHT

LEFT

RIGHT

LEFT

AUX

IN

CAUTION:

SPEAKER IMPEDANCE

16 32

PAL

NTSC

01-13HX-Z77&55[U]6.p65

03.8.18, 10:42 AM

9

Advertising
This manual is related to the following products: