JVC CA-HXZ55D - Manual (Page 34)

29
English
Continuous Playback
You can play discs continuously.
• Make sure you do not select “REPEAT 1” or “REPEAT 1 DISC”
to operate this function.
1
Load discs.
2
Select the disc to start playing back.
On the remote control:
Press the corresponding disc number button
(DISC1 – DISC5) while holding down SHIFT.
and
On the front panel:
Press the corresponding disc number button
(DISC1 – DISC5).
The unit searches for the disc, and starts playing with the first
track of the selected disc.
DVD DVD SVCD SVCD VCD VCD CD CD
Disc playback sequence
When more than one disc* are loaded on the disc trays, they are
played in the following sequence:
Ex.: • When DISC2 is pressed:
DISC2 ] DISC3 ] DISC4 ] DISC5 ] DISC1
(then stops)
• When DISC5 is pressed:
DISC5 ] DISC1 ] DISC2 ] DISC3] DISC4
(then stops)
* When no disc is loaded on the tray, that disc tray is skipped.
Continuous playback does not work for SVCD/VCD
with the PBC function and some DVDs
When you play these discs, press ENTER or DISC 3.
When a disc menu appears on the TV screen
See “Playing Back by Using the Disc Menu” on page 32.
To stop play for a moment, press 8.
While pausing, the elapsed playing time and the disc indicator flash
on the display.
• To start playback again, press DISC
3.
To stop playing, press 7.
• This unit can store the stop point, and when you start playback
again by pressing DISC 3, playback starts from the position
where you have stopped—Resume Play. (“RESUME” appears on
the display.)
To use Resume Play, you need to turn on the Resume function.
(See page 63.)
– The Resume function does not work for CDs, MP3 and JPEG
discs.
– When using the Resume function on SVCD or VCD with PBC,
the playback might start on a position slightly different from
where you have stopped.
• To stop completely when you use the Resume function, press 7
twice.
When you select another disc tray
The stored position where you have stopped will be erased.
Playing Back Discs
(continued)
25-34HX-Z77&55[U]6.p65 03.8.18, 10:42 AM 29