JVC CA-HXZ55D - Manual (Page 36)

31
English
DVD DVD SVCD SVCD VCD VCD CD CD
DVD DVD
DVD DVD SVCD SVCD VCD VCD CD CD
DVD-VIDEO TITLE 2 DISC 3 TOTAL 1:01:58 CHAP 3 8.5Mbps
2 1 3 4 5
DISC 2 TIME 1:58 TRACK 3 CD
2 3 5 1
SVCD SVCD VCD VCD CD CD
To go to a particular track directly
using the number buttons
On the remote control ONLY:
Pressing the number buttons before or during playback allows you to
start playing with the track number you want.
Ex.: To select number 5, press 5.
To select number 10, press 10.
To select number 20, press +10, then 10.
To select number 23, press +10, +10, then 3.
While playing a SVCD or VCD with the PBC function
Number buttons may be used for selecting an item in the menu. (See
page 32.)
To search for a particular
point
You can search for a particular portion while playing a disc—
Forward/Reverse Search.
• Press ¡ or 1 during playback.
Each time you press ¡ (or 1 ), the unit forwards (or reverses)
playback, changing the playback speed as follows:
x2 ] x5 ] x10 ] x20 ] x60
Pressing DISC 3 resumes normal playback.
During Forward/Reverse Search
When playing a DVD, SVCD, or VCD disc, no sound comes out
during Forward/Reverse Search.
To show the on-screen
indication
You can show the following information on the TV while playing
back a disc.
On the remote control ONLY:
To show the on-screen indication, press ON SCREEN while
playing a disc.
Ex.: When DVD is a playing source.
Ex.: When SVCD/VCD/CD is a playing source.
1: Disc type
2: The disc tray number of the current disc.
3: For DVD:
Current title number.
For SVCD/VCD/CD: Current track number.
4: Current chapter number.
5: Various time indications.
When you press ON SCREEN twice, the pull-down menu will
appear on the TV. For details, see “About the On-screen Bar” on
page 36.
To erase the on-screen indication, press ON SCREEN repeatedly
until it goes off.
To increase the sound level for DVD playback
automatically
The DVD’s audio sound is sometimes recorded at a lower level than
for other discs such as VCDs or CDs.
If you have adjusted the volume level for a DVD, the output sound
may be unexpectedly loud when you start playing back a disc other
than DVD.
To avoid this inconvenience, this unit is preset to increase the sound
level for DVD playback automatically—the initial setting is “DVD
LEVEL +.”
• Once you have set this function, it is effective every time you play
back a DVD.
• This function does not affect any discs other than DVDs.
• This function does not affect the audio output level through the
OPTICAL DIGITAL OUTPUT terminal.
To turn on and off the function, press DVD LEVEL.
• Each time you press the button, the setting alternates between
“DVD LEVEL +” (on) and “DVD NORMAL” (off).
Playing Back Discs
(continued)
25-34HX-Z77&55[U]6.p65 03.8.18, 10:42 AM 31