Jaguar Touch Screen Display JJM 18 42 26 701 - Manual (Page 109)

109
Using the System
R
Recalling the nametag you have just
stored
Entering a Phone Number
Now try entering a phone number of your
choice and try some of the following
commands:
1. DIAL, dials the number entered.
2. STORE, stores a nametag of your
choice (as in the above example with
RADIO STORE NAME).
3. CORRECTION, deletes the last string
of digits entered, and allows you to
re-enter them.
4. CANCEL, cancels the command.
Note: When entering a number of your
choice, remember numbers can only be
given as single digits, but you can enter
the digits in as many groups as you like.
Also, when the system has read out the
numbers you have entered, you do not
have to wait for the ‘Continue entering
digits’ prompt. Simply press the voice
button and continue with your dialogue.
Your instructions to the system System response
Press and release the voice button ‘Beep’
After the beep say ‘Radio tune my
favourite station’ The system responds with:
‘Radio tune my favourite station’ and
tunes the radio to the frequency stored
with this name
Now try storing a nametag of your choice, and then recalling it.
Your instructions to the system System response
Press and release the voice button ‘Beep’
After the beep say ‘Phone enter zero
one six one four’ The system responds with:
‘Phone enter oh one six one four, ……
Continue entering digits or say dial, store,
correction or cancel’
Press and release the voice button ‘Beep’
After the beep say ‘nine six oh nine nine
eight’ The system responds with:
‘nine six oh nine nine eight, …… Continue
entering digits or say dial, store,
correction or cancel’
Press and release the voice button ‘Beep’
After the beep say ‘Cancel’ The system responds with:
‘Enter cancel’