Jaguar Touch Screen Display JJM 18 42 26 701 - Manual (Page 73)

73
Set Up Menu
R
Map Options
- Memory Point Icons: Show.
- Time To Destination: Show.
- Message Centre Guidance: Off.
- Low Fuel Warning: On.
• To select the complete set of default
settings, touch OK.
Map version
The screen shows the issue date of the
Navigation System DVD currently loaded.
Calibration
Sometimes the vehicle position may not
be correct. This can occur, for example, if
the vehicle has been moved on a trailer or
by ferry. If the new position is not found
automatically by the system, it can be
corrected by using the calibration
procedures (Position first).
• Touch Position to adjust the vehicle
position.
• Touch Distance to recalibrate the
system.
The screen briefly shows ‘Distance
Calibration is in Progress’. Calibration is
carried out during normal driving. No
notification is given that distance
calibration has been completed.
Position procedure
The map showing the current vehicle
position is displayed.
• Scroll the map until the navigation
symbol (vehicle position) is in the
correct geographical location.
• Touch OK to confirm the new position
and display the map screen for
heading adjustment.
Note: If a route is set, a new route
calculation will be carried out.
Position heading
The map screen showing the heading
adjustment arrows is displayed.
• Adjust the vehicle heading using the
arrows (clockwise or anticlockwise),
until the navigation symbol is shown
in the correct alignment.
• Touch OK to confirm the new
heading.